1 Attachment(s)
G.Weike Lasercut Software / Firmware mismatch?
Hello,
This is my first laser cutter so still getting up to speed... I purchased a used G.Weike LG500 (2013) but am having problems getting the software working. I think I am trying to use an incompatible version of Lasercut 5.3 - as the DLL version reads 4.1.2.2 and the version of the firmware 4.1.3.0
Does anyone know how to solve this? or where to download the correct software?
Best regards,
David
http://www.cnczone.com/forums/attach...d=361448&stc=1
Re: G.Weike Lasercut Software / Firmware mismatch?
Quote:
Originally Posted by
daviddavid
Hello,
This is my first laser cutter so still getting up to speed... I purchased a used G.Weike LG500 (2013) but am having problems getting the software working. I think I am trying to use an incompatible version of Lasercut 5.3 - as the DLL version reads 4.1.2.2 and the version of the firmware 4.1.3.0
Does anyone know how to solve this? or where to download the correct software?
Best regards,
David
http://www.cnczone.com/forums/attach...d=361448&stc=1
As I recall I had one of those machines and it used an older version of the program, like 3.3 or something like that. The G.Weike website should have a downloads area, otherwise there was a Rep on here maybe she can help?
> Lucy Lee G.WEIKE LASER
[email protected]
1 Attachment(s)
Re: G.Weike Lasercut Software / Firmware mismatch?
Quote:
Originally Posted by
daviddavid
Hello,
This is my first laser cutter so still getting up to speed... I purchased a used G.Weike LG500 (2013) but am having problems getting the software working. I think I am trying to use an incompatible version of Lasercut 5.3 - as the DLL version reads 4.1.2.2 and the version of the firmware 4.1.3.0
Does anyone know how to solve this? or where to download the correct software?
Best regards,
David
http://www.cnczone.com/forums/attach...d=361448&stc=1
David,
we try to send new software to you but it was regards as virus and refused ,here is our website download link ,you can download by yourself
http://www.wklaser.com/index.php?m=c...108&l=2&page=1
Attachment 361498
Best Regards
Lucy