1 Attachment(s)
Colombo RS73 cooling fan question.
Hiya,
I got this Colombo RS73 spindle in 2008 on a small K2 machine. Situation changed and it got put into climate controlled storage until recently. I have everything set up and I can turn the spindle on and off from the machine and I can adjust the rpm of the spindle. What is bothering me is the cooling fan doesn't come on. I don't know if it's supposed to come on with the spindle, or if there is a temperature sensor? I have only run it for a couple minutes until I know for sure. tia
Attachment 308696
Re: Colombo RS73 cooling fan question.
In case anyone else has a similar question, I heard back from Colombo. The fan is powered separately from the spindle. It is a 220vac fan. I need to dig in and see how K2 wired it.
1 Attachment(s)
Re: Colombo RS73 cooling fan question.
This is an old thread, but still, how did you connect the spindle and fan? This image is from my rs73 and I think three brown lines should connect to the vfd, and two black lines straight to 230V/50Hz. Am I right?https://www.cnczone.com/forums/attac...d=484376&stc=1