Does anyone have any experience with a MACH 3 interface board BV2? In particular does any one have any kind of user manual, or has anyone used one of these successfully. I am trying to connect it to a Furing Inverter to control a spindle.
Printable View
Does anyone have any experience with a MACH 3 interface board BV2? In particular does any one have any kind of user manual, or has anyone used one of these successfully. I am trying to connect it to a Furing Inverter to control a spindle.
duplicate post !
can you post a photo of the board and / or a link to the advert ?
a web search for the MACH 3 interface board BV2 found different boards !
John
PS
this is a link to the manual for one board found
http://cnc4youstore.com/images/Ebay%...anual_rev1.pdf
Picture of board is attached
I have not found your BOB but this is very close
Attachment 433706
Attachment 433708
it looks very like your BOB but takes a 5V supply from the PC instead of having a DC/DC converter to produce an isolated 5V dc supply
Attachment 433710
a photo of the underside of your BOB will help
John