-
Hello dear CAM community!
Does anyone have a database of macros for hyperMill with different drilling macros? For example, centering/ drilling/ rubbing, or for thread?
I work with 9.51 and have problems with the database.
How do you administrate the tools with the macros?
I always get utter confusion.
Regards
Potti
-
Hello Potti,
I’m going to upgrade our database of macros soon. We have almost 100 macros and the bigger part is for different materials.
Example: ISK screw M12 counterbored.
First I made a macro with cutting data for certain material. Now I copy the macro four times and allot each copy to another material – we use 5 different types of steel. There has ro be also a macro for the second side. In this way 10 macros are created from one simple boring.
If someone has an example of more efficient proceeding, tell me!
I’ve tried to edit the access-file that the database is based on, but without success.
Regards
Gerhard
-
Hello people,
Why do make a macro for each material? Input cutting values together with tools in the tool database!!! -> one macro for all materials.
Regards
Zuse
-
Hello,
It’s interesting for me, too, how a macro can choose the right cutting value for the appropriate material.
@zuse
could you exactly describe how it works?
I have alloted the cutting data to each tool. But if I choose “use macro”, then only the values with that the macro was created are assumed.
@ gerhard4
you’ve written in one old article about how materials can be chosen in the database of macros via pull-down bar. I can’t find this function (Hypermill version 9.6 SP1 / tool database Version 5.2)
Now I’m surprised that you make the similar macros for different materials.
Maybe the support could explain something about this cryptical history. There isn’t a word about it in online help.
Regards
Roland