Bison Gear Motor Modell 016-500-9115 / Haas part number 62.0050

A customer uses a Haas Micron VCE1250,

The chip conveyor of this machine is original switched on and off through a board. This part of the board is burned, so the chip conveyor is not working at all.
The local electrician cuts all wires, and after this, he didn't understand anymore, and ran away, leaving me with the problem.

So I made an ordinary switch on the machine: left/stop/right with a few relais.
Now I want to hook up the motor, but run to an unexpected problem.
This motor is a made by General Electric, 5KCP20L G8353 T CL B INSUL
The assembly is from Bison Gear Motor: Modell 016-500-9115
Out of this motor comes 5 wires:
Blue
White
black
red
brown
There is also a capacitor.


I have tried everything to clarify the connection of this gear motor.

I`ve contacted Bison USA and got the information from Canada. Its a motor for Haas. This is located in Belgium.

The representation in Germany could not say anything. They give the question to Belgium.

Belgium wants to give no information to me !

Any help would be highly appreciated.

Thanks in advange and greetings from The Netherlands!
Attachment 338842

You are in luck as I have this exact motor apart.

Motor ----- Cable

Red to Cap to Red
Blue to Orange
Brown to Blue
Black to Black
White to White


Green(cable) = Ground
Yellow(cable) = Not used

Thanks, that makes things a bit more clear!
As I want to drive the motor with ordinary relays I made a small drawing,
Do you thinks this will work?
Attachment 339252

Can you please share the electrical drawing if possibel?

Sorry for inconvenience you faces, really disappointed.

If you are planning to purchase a new geared motor then I can helps you deliver the high quality & efficiency product.

We have a wide range of gear box & geared motors and also open for develop according to your requirements as well as.

This is one of our product I can consider- Helical Gear Box & Geared Motor

Characteristics-
Optimised size/performance ratio
Highly efficient and low-maintenance
Designed for permanent operation under rough conditions
Housing produced from high quality grey cast iron with rugged walls
High axial and radial forces on the output shaft are permitted
Extremely torsion-resistant
Hardened helical gears produced from high quality steel with precision ground tooth profiles
Diverse attachment options.

You can purchase this gear box from https://www.rehfuss.com/en/ with worldwide delivery.