hi all
how will the gcode by to go home in ACRAMATIC A2100?
thanks
Printable View
hi all
how will the gcode by to go home in ACRAMATIC A2100?
thanks
You can set a HOME position with the Pendant and use the G28 with P variables. RAP will explain this.
I prefer to move the Machine Axes to where I want the Home to be; then select "Current Display" screen.
Record the desired "Machine Position" Coordinates.
You can program a M26 ; This moves the Face of the Spindle to a full Z-Retract position in Machine Coordinates.
Program a G0/G1 G98.1 Xx.xxxx Yy.yyyy Fxxx ;to position the X & Y in Machines Coordinates.
This will NOT be lost at a power fail or unsequenced shutdown; like the HOME position.