https://youtu.be/-di-NMFy5iI
as in video, it's 3 axis rotary milling (spindle) machine, 1 rotary and 2 linear axis with a spindle. i couldn't see that option in rhinocam, there is 4 axis or 3 axis lathe without spindle.
Printable View
https://youtu.be/-di-NMFy5iI
as in video, it's 3 axis rotary milling (spindle) machine, 1 rotary and 2 linear axis with a spindle. i couldn't see that option in rhinocam, there is 4 axis or 3 axis lathe without spindle.
Requires an encoder on the spindle, or rather than turn the spindle into a servo, often the spindle motor is turned off and a separate servo takes over and gears the Z axis off of this spindle motor encoder.
The spindle then becomes a C axis
i don't see a reason for an encoder or servo instead of spindle, why you think that?
and do you think it's not 3 axis?
I have the same issue, if you use Madcam you can do it... I'm still fighting to do it on Rhinocam