ATC

Hello,
I replaced the battery in the tool changer servo(vigoservo ars15), now i get alarm 77 mgn position alarm on the screen.
Please help me setting origin.
Thank you.

Machine ?
OSP-xx?
Year ??

Little bit more details, y get more answers

http://teijin-seiki.com/AR%20Manual.pdf

Hello,
This machine Okuma-Howa 438V 21M Fanuc.
I have not the manual Vigo Servo ARS15-06. Manual Vigo Servo AR Series not the same.
Please help me setting parameter.
Thank you.

Hello,
I also face the same problem. Have you solved the problem? Can you help me with it? Thank you so much.

Quote:

---

Originally Posted by Toan_Ong

Hello,
I also face the same problem. Have you solved the problem? Can you help me with it? Thank you so much.

---

I lost parameter of Vigo servo
Can anyone help me?

Hello, I recently started to do maintenance on an Okuma Howa 438 machine with Fanuc 18M C series control, this machine has a problem of loss of Fanuc control parameters, the magazine does not work either, I was looking and I realize that the servo gives me a alarm E 101 and in the manual it tells me that the servomotor needs to be changed, I don't know if you have similar problems. Regarding the parameters I am attaching a servo manual and I am also attaching the list of parameters that my machine has, I would appreciate it if you would comment on the solution you gave to your problem.

Sorry about my English, I still haven't mastered it well.