1 Attachment(s)
Bridgeport Torq Cut 2G heidenhain tnc 370 Machine is not moving no homing PLZ HELP
Hello my Bridgeport Torq Cut 2G VMC machine with heidenhain tnc 370 controls has frozen , Nothing is moving its no Axis is referencing to home position ...Dont know what to do anyone please advice how to go about this & what to do ...PLEASE HELP ME ...
The Alaram is showing as Z Axis Motor Overheat..
and i also need the PLC paramenerts the controls heidenhain tnc 370
NC 280600 13
PLC 278215 11
HELP will be much appreciated ..
Re: Bridgeport Torq Cut 2G heidenhain tnc 370 Machine is not moving no homing PLZ HEL
I had the same machine with the same problem. Check the Z axis limit switches one of mine was broken.
Re: Bridgeport Torq Cut 2G heidenhain tnc 370 Machine is not moving no homing PLZ HEL
Quote:
Originally Posted by
jamesclerie
I had the same machine with the same problem. Check the Z axis limit switches one of mine was broken.
Sir please help me , Can you get me the electrical & PLC parameters manual , Or can you atleast send me the PLC parameters ...This will be of great help the machine has been idle for more than a year now ...PLEASE help