enabling costum macro b on a fanuc om controller
Hi, i hope this is the right place to post this question.
We have recently acquired an old leadwell machine with a fanuc om controller. we tried to run a g-code generated by solidcam, but whenever the machine reaches a line that contains a "#" symbol, a ps 004 alarm pops.
I read online that the # is for variable decleration in a programming method called costum macro b. we asked a tech guy, and he said that our controller supports this type of programming, but we have to enable it by changing some parameters (he doesnt remmember which exactly).
So, does anyone know how to fix this?
Thanks,
Tom
Re: enabling costum macro b on a fanuc om controller
Quote:
Originally Posted by
Al_The_Man
PM sent.
Al.
I have exactly the same requirement on my Yang with fanuc 0TM
could realy do with enabling macroB
The control obviously understands it as the tool change Macro is in B ?
Re: enabling costum macro b on a fanuc om controller
See PM.
Should I call you Leon?;)
Al.
Re: enabling costum macro b on a fanuc om controller
Quote:
Originally Posted by
Al_The_Man
See PM.
Should I call you Leon?;)
Al.
same issue here... batteries died and lost everything..
almost up and running, but mustve reloaded an old backup that didnt have macro b enabled!
if you could help...
many of the thanks would be sent over the interwebs!
Re: enabling costum macro b on a fanuc om controller
Quote:
Originally Posted by
Trufiby
same issue here... batteries died and lost everything..
almost up and running, but mustve reloaded an old backup that didnt have macro b enabled!
if you could help...
many of the thanks would be sent over the interwebs!
You would need to send me a email add via PM.
Al.
Re: enabling costum macro b on a fanuc om controller
Hello,
I'm having the same need with a Victor vcenter-65 OM control machine from '92.
is it possible to turn macro-B on?
Thanks for any help!
Re: enabling costum macro b on a fanuc om controller
Quote:
Originally Posted by
Kushvijay
This is my first reply on this forum, sorry for any mistakes,
Please share me also the same procedure
For enabling costum macro b my machine
.
Cannot send P.M. as not sufficient posts
Al.
Re: enabling costum macro b on a fanuc om controller
Hi
I have same issue on Fanuc OM
machine: Leblond Makino RMC55
I would like to enable custom macro B
Could you help?
Thanks
Bartek
Re: enabling costum macro b on a fanuc om controller
Re: enabling costum macro b on a fanuc om controller
I know, old thread but maybe someone still has the info.....
I need the 900 parameter list for an 0T control.
Thanks in Advance
Re: enabling costum macro b on a fanuc om controller
Quote:
Originally Posted by
Al_The_Man
Email add needed.
Al.
Hi Al,
I am looking for way to enable Macro B on my Fanuc 18i controller, can I please have your help to send me the info? Thank you.
Re: enabling costum macro b on a fanuc om controller
I am looking for way to enable Macro B on my Fanuc 180i -M controller, If this is possible. If you can help that would be a great
[email protected]
Thank you
Re: enabling costum macro b on a fanuc om controller
Any solutions to this problem? Have Fanuc 0m where we have Macro menu but can't start with #
