Hello,
Running a Cnc wood lathe with a knife cutter. Is it possible for Bobcad Cam to make a single depth profile turning cut ? ( no multiple passes) . If so what would’ve be the best way to preform this operation?
Thank you.
Printable View
Hello,
Running a Cnc wood lathe with a knife cutter. Is it possible for Bobcad Cam to make a single depth profile turning cut ? ( no multiple passes) . If so what would’ve be the best way to preform this operation?
Thank you.
Yes, however that would have to be a single "Basic Finish" strategy, see image below.
https://www.cnczone.com/forums/attac...d=432314&stc=1
https://www.cnczone.com/forums/attac...d=432316&stc=1
Hope that helps
Regards
Rob
Thank you!