Printable View
hello i have a problem with my "new" Maho, i have MH600E and when i use M66 (T31 M66) on screen display "intervention" then i can open tool chuck (by button on keyboard) and putin tool, when i try do it on MH800E2, on screen is only T31 tool ready to use, but i cant put it by hand (works similiar like M67) i think there is some wrong in constant preferences, but i cant find where, can someone help me with it?
ps.constant prefs are not the same as on my MH600E so i cant compare all of it
What error is showing?
there is no error, just M66 works like M67 (you see on screen your tool thats all, i made pchysical button to open tool chuck, its not sovled fine but works
i have bigger problem, machine has wrong ways, cube 40x40x20 made 40,7x40,7x20 (Z axis is fine)
can someone help me with constant for that cnc? i think it was repair and there is wrong parameters
Try this constants, but first save your original via RS232 or write them on paper.
Regarding the cube problem check backlash on X and Y .
yes i check backlash and its help... so its already work, but i think much slower then my 600E (Mhz on CPU ? can i change CPU card for faster one?)
It is not the CPU, normally the 800 e2 is faster than the 600 e. Probably some parameter settings are bad.
G0 is faster 6000 (600e 4000) dobule tool changer, its all look much faster, but reading programm (i dont have postprocessor so i have many many many lines for make one wheel) and both has 19200 for transfer and when i put some test just load the same programm 600e ended 1000lines faster (they can take only 5500lines so its huge) but i see reading programm tookes 8000e2 more time (i can se sometimes stops on wheels, and its not problem with loading from pc but inside that awesome DX386, 600E can read lines faster than RS232 can take, 800E2 not, im trying to compare constans but they not exacly the same, so im thinikn about that math coprocessor, or maybe someone looks here and send me constants for good working M800E2 (my email. [email protected])
You use BTR MODE for long programs? In my opinion the maximum baud rate for this old machines is 4800. I use EdgeCam for my machine with a special post processor that I modified for the vertical spindle . It outputs the code for helical interpolation in holes very short about 3 lines. It s fine for every day work. But if you want to do a 3 axis contour on a part it will output a point by point program, very long. For the horizontal spindle I use Esprit Cam with custom post processor. I found this constants for maho mh 800 e2 . Maybe it will help
%CM
N0 C1
N1 C4
N2 C512
N4 C0
N5 C0
N9 C1
N10 C3
N11 C1
N14 C71
N27 C30
N28 C0
N29 C1
N31 C0
N32 C0
N34 C0
N37 C1
N42 C0
N43 C0
N44 C0
N51 C1
N78 C1
N79 C40
N80 C0
N81 C0
N82 C99
N83 C99
N84 C0
N85 C50
N86 C1
N88 C1
N91 C0
N93 C32
N100 C1
N103 C88
N105 C1
N108 C89
N110 C1
N113 C90
N200 C1
N202 C1
N203 C2
N204 C1
N205 C60000
N206 C30000
N208 C20000
N209 C10000
N210 C1667
N211 C50
N212 C50
N213 C2
N215 C1667
N216 C1667
N217 C1667
N218 C4
N219 C40
N220 C0
N221 C5
N222 C10
N223 C200
N224 C0
N225 C0
N226 C0
N228 C3
N229 C0
N230 C1
N231 C6000
N232 C0
N233 C801500
N234 C0
N235 C-500
N236 C-802500
N237 C0
N238 C-800000
N239 C0
N240 C0
N242 C0
N245 C0
N246 C0
N250 C2
N252 C-1
N253 C2
N254 C1
N255 C60000
N256 C30000
N258 C20000
N259 C10000
N260 C1667
N261 C50
N262 C50
N263 C2
N265 C1667
N266 C1667
N267 C1667
N268 C4
N269 C40
N270 C0
N271 C5
N272 C10
N273 C200
N274 C0
N275 C0
N276 C1
N278 C3
N279 C0
N280 C1
N281 C6000
N282 C0
N283 C501500
N284 C0
N285 C-500
N286 C-502500
N287 C0
N288 C0
N289 C-1000
N290 C0
N292 C0
N295 C0
N296 C0
N300 C3
N302 C1
N303 C2
N304 C1
N305 C60000
N306 C30000
N308 C20000
N309 C10000
N310 C1667
N311 C50
N312 C50
N313 C2
N315 C1667
N316 C1667
N317 C1667
N318 C4
N319 C40
N320 C0
N321 C5
N322 C10
N323 C200
N324 C0
N325 C0
N326 C0
N328 C3
N329 C0
N330 C1
N331 C6000
N332 C0
N333 C551500
N334 C0
N335 C-500
N336 C-552500
N337 C0
N338 C0
N339 C65280
N340 C0
N342 C0
N345 C0
N346 C0
N500 C4
N501 C1024
N502 C-1
N503 C2
N505 C10
N515 C6000
N516 C6000
N517 C6000
N518 C2
N519 C30
N520 C0
N521 C0
N522 C10
N523 C30
N525 C30000
N526 C30000
N527 C30000
N528 C2
N529 C30
N530 C0
N531 C20
N532 C10
N533 C40
N535 C128
N536 C128
N537 C128
N538 C0
N539 C15
N540 C0
N541 C0
N542 C0
N543 C0
N545 C128
N546 C128
N547 C128
N548 C0
N549 C15
N550 C0
N551 C0
N552 C0
N553 C0
N560 C2
N565 C100
N566 C193447
N568 C2
N570 C1
N571 C746
N572 C5000
N573 C5000
N574 C5000
N580 C7925
N581 C25
N582 C10
N583 C8890
N584 C0
N585 C0
N586 C50
N588 C19
N589 C50
N590 C10
N591 C5
N599 C5
N705 C3
N706 C3
N707 C71
N710 C10
N711 C44
N712 C10
N714 C2
N715 C6
N719 C1
N720 C83
N723 C5000
N724 C0
N725 C0
N726 C5000
N740 C30000
N741 C20000
N744 C2
N745 C150
N746 C0
N747 C150
N748 C50
N750 C0
N751 C0
N752 C0
N770 C0
N771 C0
N772 C0
N773 C1
N774 C0
N775 C1
N776 C9600
N785 C1
N786 C9600
N796 C2
N798 C0
N799 C1
N800 C0
N840 C0
N841 C1
N842 C0
N843 C140000
N844 C5000
N845 C50000
N846 C1000
N847 C0
N848 C0
N850 C0
N851 C0
N860 C0
N861 C0
N862 C0
N863 C0
N864 C0
N865 C0
N866 C0
N867 C0
N868 C0
N869 C0
N1000 C30
N1001 C480
N1002 C8
N1003 C30
N1004 C0
N1005 C0
N1006 C0
N1007 C500
N1008 C10
N1009 C30
N1010 C0
N1011 C0
N1012 C0
N1013 C0
N1014 C0
N1015 C0
N1016 C80
N1017 C80
N1018 C80
N1019 C0
N1020 C0
N1021 C15
N1022 C0
N1023 C0
N1024 C10
N1025 C0
N1026 C0
N1027 C0
N1028 C0
N1029 C0
N1030 C1
N1031 C0
N1032 C0
N1033 C0
N1034 C0
N1035 C0
N1036 C0
N1037 C0
N1038 C0
N1039 C1
N1040 C0
N1041 C1
N1042 C0
N1043 C1
N1044 C0
N1045 C0
N1046 C0
N1047 C0
N1048 C0
N1049 C0
N1060 C0
N1070 C0
N1071 C0
N1072 C0
N1073 C0
N1074 C0
N1075 C0
N1076 C0
N1077 C0
N1078 C0
N1079 C0
N1080 C0
N1081 C0
N1086 C0
N1087 C0
N1090 C1750
N1091 C280
N1092 C140
N1093 C50
N1094 C50
N1100 C0
N1101 C1
N1102 C0
N1103 C0
N1104 C0
N1105 C0
N1106 C0
N1107 C0
N1108 C0
N1109 C0
N1110 C0
N1111 C0
N1112 C0
N1113 C0
N1114 C0
N1115 C0
N1116 C0
N1117 C0
N1118 C0
N1119 C0
N1120 C0
N1121 C0
N1122 C0
N1123 C0
N1124 C0
N1125 C0
N1126 C0
N1127 C0
N1128 C0
N1129 C0
N1130 C0
N1131 C0
N1132 C0
N1133 C0
N1134 C0
N1135 C0
N1136 C0
N1137 C0
N1138 C0
N1139 C0
N1140 C0
N1141 C0
N1142 C0
N1143 C0
N1144 C0
N1145 C0
N1146 C0
N1147 C0
N1148 C0
N1149 C0
N1250 C0
N1251 C10
Yes i use BTR Mode, baudrate works faster for sure (on mh600e for 1000% sure)and i know step by step programm isnt best option, and yes mh600e can do loaded programm faster then its load from pc, but mh800e2 cant (and this is strange for me)baud rate works slower on 800e2 (i see it) but even with slower loading from PC, they cant used all lines faster than its load, so its not problem with baudrate beetwen PC and Maho, but iniside MahoQuote:
Originally Posted by viorel23cnc
these constans are yours? or you saw that cnc at work? or just found on web? anyway thank you ill print it and compare