Deckel maho 60T TNC 426/430 magasin problem
hello i have problem with Deckel Maho 60T with magasin TNC 426/430
machine not changing tools with magasin but only manual changing
please help how to activate automatic changing tools from magasin
for the moment is like this MDI tool call 1 Z and Y axis go to door and i have to open door change manual tool and close door
Re: Deckel maho 60T TNC 426/430 magasin problem
Hi, I think you need to check first your tool table and then the pocket table.
If a tool is in the pocket table in position 1-20 then your machine should then go to the magazine.
If the tool does not appear in the pocket table then the machine assumes it is a manually loaded tool.
Hope this helps