Re: Holding brake needed on a 4/5th axis when using a harmonic drive?
Quote:
Originally Posted by
spumco
Will it work? Yep. And the OP, if this thing ever gets built, will work out what the actual limitations of using it are.
Well...
https://www.cnczone.com/forums/attac...d=429150&stc=1
Pic is just after I poured the epoxy a couple days ago. It's starting to cool off here in Ohio so I hurried up and got the frame together so I could get the epoxy down before winter. Checked it today with my 36" straight edge and except for the weld seams where the epoxy is a little deeper and shrunk more, I couldn't get a 0.0015" feeler gauge to go so I am pretty happy. Gonna bring home my 0.0005" level home from work tomorrow and see where I'm at.
I should really start a build log since this isn't really the right sub-forum for this.
Re: Holding brake needed on a 4/5th axis when using a harmonic drive?
Did you say Ohio?
Care to share what part?
Re: Holding brake needed on a 4/5th axis when using a harmonic drive?
Re: Holding brake needed on a 4/5th axis when using a harmonic drive?
Quote:
Originally Posted by
shinji2k
Lancaster
Ahh. Close, but not close enough to Ashtabula for a mid-week garage night.
Re: Holding brake needed on a 4/5th axis when using a harmonic drive?
Yeah its a bit far to drive for, admittedly, not much to see.