I think some people do that. You probably want to check and compare the discs stated rpm to what the mitre saw will run it at.....
Printable View
I think some people do that. You probably want to check and compare the discs stated rpm to what the mitre saw will run it at.....
If you are using a miter saw do you have a way to clamp the stock down? I use a sliding compound miter saw for cutting aluminum and it works great but I would feel a lot better having a postive clamping mechanism.
I had a chop saw, makes a lot of dust and those bladesd go really quick, changed to a bandsaw best buy ever :) except if you break your last blade, good luck on finding a blade on a saturday :P
Go to the Hobart Weld Talk forum and do a search. They had a link to by one of the carbide metal cutting blades for around $40. I think it is Bullet Industries that is selling the blade.
While looking for metal abrasives, I found essential grinding discs. Check out photo
http://www.maxmetalltd.com/popup.htm...40954645pz.jpg
That thing looks right in my price range, along with looking like it does exactly what I am after.
I am curious though, can I get it with the Aluminum blade or am I stuck with the steel blade and gotta buy the Aluminum one seperately?
Later EddieO
Well , I can share my hubby's experience here. His first saw was a Dewalt chop saw . It functioned admirably enough but the accuracy of the cut and sparks was not so cool to him ever. He had a cutting blade expode one time and he chose to change it with a Makita LC1230 saw .
He could never backpedal to a abrasive saw again . The cold saws are more costly yet he have observed it to be significantly more accurate, clean and secured...
The abrasive saw is made of a stainless alloy that cuts stone, metal, and many other materials
The content that you share with us is really informative and it gives us the knowledge of how things are. Thank you for sharing this wonderful post with us.
Useful Links:
Tuition Agency
Tuition Assignments
Homestay Singapore
AEIS Mock Papers
I’d want to use some with the content on my blog whether you don’t mind. Naturally I’ll give you a link on your web topic.
Jake | élagueur
A grating slash saw is ordinarily a table-top device implied for cutting hard materials like metal and is discernable by the kind of sharp edge or plate it employments. The cutting activity of this sort of saw is performed by a rough plate which is very much like circles found on granulating wheels however a lot more slender. The cutting haggle are mounted normally on a rotating arm appended to a fixed base. The base regularly uses an underlying tight clamp or clip to get materials. The cutting circle is ordinarily around 14 in (360 mm) in breadth and 7⁄64 in (2.8 mm) thick. Bigger saws can utilize 16 in (410 mm) width plates. Grating saws regularly use plates with precious stone and cubic boron nitride, which last more than customary edges. I'm just not sure if they use it for tree removal service.
I've never tried the abrasive chop saw. A lot in here might be looking for electricians sarasota