FANUC 0T parameter problem
Hello;
A friend of mine has a Fanuc OT / CNC lathe Whacheon Model ECO-2 and lost the parameters due to a bad battery. We managed to get it working except for the Tool change turret which works manually but doesn't work (the turret keeps on rotating ) from a T code. We suspect it is a parameter problem because it was working fine before the battery problem.
Your help will be sincerely appreciated.
Best regards,
kreutz
Need Help-Lost all diagnostcs of HWACHEON ECO-2N Fanuc OT model
Hi do have the same problem with you after i get the parameters the turret cannot rotate in T code even also the tail stock. I can not get the diagnostic .If you get some solution please help me.Any one who have a manual may help me to solve this problem spatially the diagnostic.
Re: FANUC 0T parameter problem
Anyone needing the parameters and diagnostic settings, please, contact me. The photos of the parameter and diagnostic screens on our machine (Whacheon lathe with Fanuc-0T) are in a 160 Mb zip file. I can upload them to a file sharing place if necessary (for a short time, that is why I am not posting a link).
Best regards,
kreutz
Re: FANUC 0T parameter problem
Quote:
Originally Posted by
kreutz
Anyone needing the parameters and diagnostic settings, please, contact me. The photos of the parameter and diagnostic screens on our machine (Whacheon lathe with Fanuc-0T) are in a 160 Mb zip file. I can upload them to a file sharing place if necessary (for a short time, that is why I am not posting a link).
Best regards,
kreutz
Any chance you still have these? i need diagnostic parameters for 1988 ecostar 2
Re: FANUC 0T parameter problem
Thanks for your kind support my mail address is " dmmtsy@ yahoo. com" . You can send me with this address your 160MB zip file.
Best Regards
Desale
Re: FANUC 0T parameter problem
I lost parameters for mori seiki SL15 fanuc 0T c PMC-M controller . I find from SL25 . But i can not input DGN parameters DGN 300-600. Mode switch not effective,only MDI. NC parameters input work. 900-930 too. Please give me parameters or how i can inpuc PMC dgn parameters?