hypertherm hpr260xd error
Dear CNC ZONE community,
I am an owner of a Hypertherm unit, for plasma cutting.
My consummables wear out quickly, and when I checked the operator manual they reffered to the low compressed air pressure as the fault. error code "44
I checked the solenoid valve
It seems fine and I changed some of them to no avail.
Then another error appears, which is 21.
I chose the consumable parts to no avail, and I'm still facing problems.
When the operation starts, the torch goes out and the voltage appears on the screen well for a moment and then stops.
When examining the electrode after the experiment, I saw it ignited in a black color from the side of the head.
Is it possible for experts to help me
Thank you for your cooperation
Re: hypertherm hpr260xd error
I would check to make sure that your cvompressed air is clean & dry
Re: hypertherm hpr260xd error
Quote:
Originally Posted by
ajwan
Dear CNC ZONE community,
I am an owner of a Hypertherm unit, for plasma cutting.
My consummables wear out quickly, and when I checked the operator manual they reffered to the low compressed air pressure as the fault. error code "44
I checked the solenoid valve
It seems fine and I changed some of them to no avail.
Then another error appears, which is 21.
I chose the consumable parts to no avail, and I'm still facing problems.
When the operation starts, the torch goes out and the voltage appears on the screen well for a moment and then stops.
When examining the electrode after the experiment, I saw it ignited in a black color from the side of the head.
Is it possible for experts to help me
Thank you for your cooperation
this is the EXACT problem im having with my HPR260XD - were you able to figure it out? would anybody else know something? please and thank you.
Re: hypertherm hpr260xd error
Dirty or air that is not completly dry can cause problems like this