Fanuc 15M full parameter backup

This morning I made a backup of my parameters and noticed the backup file doesn't appear to contain any 900 option parameters. This is the method I used:

CNC Go into EDIT mode.
CNC Press ESTOP.
CNC Press the <, SERVICE, CHAPTER, PARAMETER, >, READ, ALL keys.

What do I need to do to view/punch my 900 option parameters on a 15M? On the 0T I hold down the EOB but not sure on this machine.

Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good. :)

Is there any one have fanuc 15 parametr backup send to me????????

- - - Updated - - -

Quote:

---

Originally Posted by forhire

Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good. :)

---

Please sent it to me

Quote:

---

Originally Posted by forhire

Never mind. I have it sorted. I pulled out my hard copy parameters and realized the 15M uses 9000 parameters. My backup is good. :)

---

You still have to make a backup of the PMC PARAMETERS. And also, any 9000 programs if the machine has . Do not forget.

Regards

Alex Fanuc

Quote:

---

Originally Posted by alexfanuc

You still have to make a backup of the PMC PARAMETERS. And also, any 9000 programs if the machine has . Do not forget.

Regards

Alex Fanuc

---

Every parameter are delete and every one is zero please help

Quote:

---

Originally Posted by Alirnjbryan

Every parameter are delete and every one is zero please help

---

What kind of machine do you have? Machine manufacturer name? Model of the machine? Serial number if you have?
Is it a 15 control?

regards


Alex FAnuc