-
Hi:
In the place i worked, there are some walter helitronic power CNC and we use cyber grinding software. Does anybody know how to import files from this software to a CAD software? or other way to make simple drawings of the tools?
Thanks.
[email protected]
-
Got a link or pdf documents with studio tools, if you give one or two in my research did not find a picture much thanks
[email protected]
-
Hi I am new to this forum also! I've been using a Helitronic Walter cnc Grinder for now 1 year.
I would like to upgrade the ToolStudio calcul speed and download, when there's a change of value on the program. Is it possible to change the Ram card on the CNC computer? Do I need special Ram bracket ?
There's always bug on the anime schema of the tool, part missing, lag etc.. Is there any other way to get it faster and better quality than changing the RAM?
Thank you all.
-
Good time of the colleague! I from Russia, work on machine tool Walter Vision three years. I prefer to work only in "Tool Studio". I am guided on not the standard tool. I can help to write or correct yours IDN.C interest I will communicate on this theme.
-
The Ram disc not the main thing if you initially not input incorrect or silly actions with a problem the minimum complete set will consult also.
-
Woodtronics NC3 Error
We have a 10 year old much used NC3 and are getting a " motor protective switch activated" error message and then it shuts down. We had the motor checked out and it is perfect. Any ideas?
-
Hello, I would like to know how to activate the Stereo Mode in sudio tool. The box is currently impossible to activate .. thank you
-
Countersinks?
Hi All, I am new on here and would like to see if anyone has any information on how to do countersinks on the Walter HMC Power machine. I could use any help anyone can provide. Thanks Ross
-
countersinks
what type of counter sinks?
new? regrind? single flute? multi flute?
they can be done, but its just easier to do them on a manual machine. especialy since they arent worth much to sharpen.
-
Has anyone running Walters expert mode had this problem with probing? Machine positions to programmed zero point but feeds away from probe instead of into it. The machine is a HMC 500 with NT. Thanks for any help.
-
Use a negative value for that input.
Buzz me if. U need more info
-
I tried that but that causes the machine to go to the wrong start point.