bavelloni cutting machine (REV 370 SLH - 2005)
I hope every thing running well.We have a bavelloni cutting machine (REV 370 SLH - 2005) and this ERROR can be seen in some times : Arms don't put glass sheet on the correct place and puts glass ahead. At this time we should run machine manually and take back glass sheet.
The Error number displayed on the drive for 2sec (Drive type: NS600 Yaskawa) : A.9F (E53E). I chenged NS600 card but it is remain.
Z .bavellony alpa 450 4n problem with tool
Hello from holy land people !!!!!!
I have problem with alpa 450 4n z.bavellony
i try to take the tool ,after this the head come neer to tool and stoped . The mesage in deskboard ( eror "waite for open cone clamp open "load
Seconde eror what i have is ( "the spindel out the range")
Halp .....
1 Attachment(s)
Re: Z .bavellony alpa 450 4n problem with tool
Hi guys, I'm having problems with Bavelloni B73 CNS.
After failing to finish the program, and manually removing the glass from the machine, I started receiving these errror:
Pads position end stroke increase
Pads position end stroke decrease
Wrong thickness end stroke.
Unfortunately I don't have operators manual.
Can anyone tell me how to reset machine to the start of the program?