machine looses position in X axes
hi i am new to this forum
was hoping to get some help with my older MS CNC JR vertical milling machine
the machine loses tracking ever so often in the x axes
totally random so is the amount of of position loss
the amount is anywhere from .002 to .0049"
it usually happens on the beginning of the milling cycle or end never in the process
any help would be greatly appreciated
DS
Re: machine looses position in X axes
It sounds like lost steps, which happens when steppers try to go too hard or too fast. You might try turning down the acceleration on the axis that's failing. It could be due to a lubrication failure, or it could be a coupler that's slipping.
Re: machine looses position in X axes
We produce DRO and linear scale, maybe it will help you, you can go to https://www.amazon.com/stores/HHXXOV...2?ref_=ast_bln
view on
Or on Whats: +8613528773691
Contact me at [email protected], [email protected]