Looking for a mentor: ArtCam + Gerber Sabre 408

Hello forum.
My name is Danil. I make signs. I've been successfully using Gerber Sabre 408 for cutting profiles but having difficulties with 3d textures.
Looking for an expert to answer my questions.

For example:
recently made a model a woodgrain texture, created a Machine Relief Toolpath and the cnc machine gave an X axis error. The solution was to change the Tool Clearance Strategy to constant-Z, that made the routing process very slow.
It took 4 hours to produce what' on the image below.

https://www.cnczone.com/forums/attac...d=473466&stc=1

https://www.cnczone.com/forums/attac...d=473464&stc=1

Thank you.

This kind of sign is normally made by abrasive blasting. You cut a mask and apply it to the wood, then blast away the background. The wood grain texture emerges naturally, because in a softwood, there's a differential between the hard winter growth and the soft wood that is added in the summer, and the abrasive removes more of the latter. It would go a lot quicker, and the wood grain effect would be more convincing as well.