Re: Takisawa TC-1 Fanuc 0-TC
Best regards to everyone,
I bought Takisawa TC-1.
I would ask you if someone has operator manual, wirring manual...
My e-mail adress [email protected];
Thanks
Tom
Re: Takisawa TC-1 Fanuc 0-TC
I also picked up a Takisawa TC-1 last week. My first CNC lathe, so any docs you guys have gathered up for this machine would help me greatly! Please shoot me a private message if you wouldn't mind sharing any soft copies you have.
Any specific advise would also be helpful. My machine is a 10HP, 8 tool turret, hydraulic 3 jaw chuck came on the machine (I might look into picking up a collet chuck also if you guys have any advice on which to get).
Re: Takisawa TC-1 Fanuc 0-TC
hi all,
anyone here have takisawa TC1 CNC Lathe Fanuc OT parameter. My machine parameter lost recently and appear a lot alarm.
通过我的 SM-G750F 上的 Tapatalk发言
Re: Takisawa TC-1 Fanuc 0-TC
Dear Mr. Darren75 ,
Yes I have takisawa TC-1.
What year is your machine?
I have saved the machine parameters
[email protected]
Re: Takisawa TC-1 Fanuc 0-TC
Quote:
Originally Posted by
cnc wedm
Dear Mr. Darren75 ,
Yes I have takisawa TC-1.
What year is your machine?
I have saved the machine parameters
[email protected]
my machine was year 1993. can sent to me by email
[email protected]
thanks a lot
通过我的 SM-G750F 上的 Tapatalk发言
Re: Takisawa TC-1 Fanuc 0-TC
Dear Mr. Darren,
I sent you email from gmail account.
cnc wedm
Re: Takisawa TC-1 Fanuc 0-TC
Good evening all, first time on here.
I have a 1993 TC-1 had its parameters deleted. I have all the parameters except for the PMC parameters 900-939. If anyone has a copy it would be much appreciated.
Regards
Brad.