Doosan puma S6

I have a 1994 Doosan Puma S with a Fanuc O-T controller
I have made a GRAVE mistake It has not been running for a number of years so I decided to retrofit it with a Centroid
So I started pulling the wiring out them left it for 6 mounts
Them a friend came to visit He said he could have fixed it and because the retrofit idea is going slow I thought I might put it back
together The wires ar very well labeled and so are the terminals it not such a big job EXCEPT for one area
The relay bank PCB 2 that controls the turret I have no Idea where the terminals And cant find it in my manual
I have a photo of the relay board showing the wires
Can any one help
Regards
Peter