Re: Boy 15s Injection Molding Manual
brian257
They are 3 phase, you need the total KW for the machine not just the motor to get them running, the 15T Boy is around 8.5 KW the heaters are also 3 Phase the motor is 7.3 Hp depending on what machine
Re: Boy 15s Injection Molding Manual
Hi all,
I'm also rely interested in for an sample of manual (and wiring diagrams many more). So , Mark please, if You can please send to me on mail [email protected].
Graemeian, Your story is amazing to me, because hydraulic diagram not so simple: solenoid->valve->cylinder. My machine is BOY30 from 1976. and very similar like washbaer picture.
Neftaly, great list,but diagram, location will be very useful. !
Boban
Re: Boy 15s Injection Molding Manual
Hi vodabo,
I have a Boy 15 manual, electrical wiring diagrams and hydraulics diagram. I am looking for PLC software to run the Boy 15. I will be rewiring the machine as the old wiring are giving me grey hairs. Can anybody assist please? I am new at PLC programming and I am willing to learn.
John
Re: Boy 15s Injection Molding Manual
Re: Boy 15s Injection Molding Manual
I've had 3 boys in my shop and they all made parts day after day. First one was like the one in the pics above. All 22Tons from the 70-80's. My two current ones are 1980 15/S and 1982 15/S with Dipronic controller which is giving me fits. The older controllers before the Dipronic were easier to trouble shoot and if they were mechanically working they made tons of parts.
Problem I'm having with the Dipronic is it no longer can control the speed of mold open/close and the screw RPM hydraulic motor. It runs wide open which I've been able to work around as it still has control over the various hydraulic pressures just not how fast it does things. I'm at a loss as to what to check for and trouble shoot. Any ideas???? thanks rob in Walla Walla, WA
Re: Boy 15s Injection Molding Manual
Hi Andy,
I see back in '12 that Mark (holycross) scanned his BOY 15 manual and may have sent it to you.
I tried to contact him, but his inbox has been full for weeks. Your is full now, so I couldn't PM.
If you have the scan, would you please email it to me?
kdopson at sbcglobal dot net
Thanks... I found a BOY 15 that had part of the control removed and another that leaks on a cylinder. I am needing the part ID for the seal/scraper/o-ring, and the schematic to fix the other with picked control.
keith
Re: Boy 15s Injection Molding Manual
Quote:
Originally Posted by
degoor
Dear Mark,
I have BOY 15s (1986) manual but it is in German. Could you kindly send me (
[email protected]) your scanned manual?
Marin
Hi I have a boy 15 please send me the manual [email protected] I have a manual for Boy 50T if you need it i can sent it
1974 BOY15 Injection Molding Machine - Manual and Electrical Diagram
Quote:
Originally Posted by
cncromex
Hi I have a boy 15 please send me the manual
[email protected] I have a manual for Boy 50T if you need it i can sent it
Hi everybody
I just got BOY 15 1974 injection molding machine. Need User Manual (Instruction for setup and operating)and electrical diagram. Hydraulics diagram will help too. Mi email is [email protected].
Thanks in advance.
I have Hydraulics diagram for BOY 80 if anybody likes to have it. Also some Service Manual for same one.
Re: Boy 15s Injection Molding Manual
Hey, I just picked up a BOY 15 today. Need to install 3 phase and pick up a chiller and hydraulic fluid. I also need a copy of the manual. Can anyone help?
Thanks.
Re: Boy 15s Injection Molding Manual
Hi a like to have a Boy 15 Manual, if you send me it, I can send you a manual for Boy 22S, ineed the hidraulic schematic for boy 15, tanks a lot
Re: Boy 15s Injection Molding Manual
Hey folks,
Have a Boy 22s. Need to get the Operating Manual it or a 15s. I think they are very similar.
thanks,
Dan
Re: Boy 15s Injection Molding Manual
Have a Boy22s I need the Operating Manual for it or a 15s. I think they are the same.
Thanks,
Dan