Takisawa TC-10 Fanuc 21TB
Hey guys
Hope someone can help.
I am still searching the forum, but....
I bought a TC-10 that has been standing around two years.The IO board is missing, but it looks as if that one is sorted.
The machine is still standing on a trailer, to be offloaded, but my grimy little hands could not resist to start tinkering. What I have seen so far is some slight wiring problems on the MTB side (footswitch wiring shorting) as well as Fanuc side (ribbon cable to CRT softkeys are damaged). Those are most probably the reasons the IO is missing in the first place. I am still going to trace through all the wiring anyways.
If I do get the IO. What will the procedures be? Will the machine start up as normal, or will I have to install the software and parameters again?
I also have zero paperwork on the machine I need anything that can be given: Operators manual, electric diagrams, parameter lists, ladder diagrams, 21 TB Fanuc manuals, etc, etc.
Can anyone help?
Re: Takisawa TC-10 Fanuc 21TB
Re: Takisawa TC-10 Fanuc 21TB
Hi Forda, thanks. I found the Fanuc manuals as well after posting on a CNC specific forum. The Takisawa manuals are elusive though. I will search some more tonight.
Thanks again.
Re: Takisawa TC-10 Fanuc 21TB
you wont find Takisawa pdf manuals online they are not available. in fact almost no machine manufacturer manuals are online.
Re: Takisawa TC-10 Fanuc 21TB
Hi smmoorthieee. I have a full control to part out. I have retrofitted to Linuxcnc. Don't know where you are, but I am in South Africa.
Re: Takisawa TC-10 Fanuc 21TB
Hello
I need setting parameter for takisawa TC-10 fanuc 21TB, any one can help me to copy setting parameter