8 Attachment(s)
Pics of my DMM servo retrofit build
After having a bunch of studdering issues and losing position with my stepper motors I decided to fix it with 750w DMM servos. Along with a host of other upgrades.
First I had to upgrade the power distribution panel
Attachment 423336
Then I had to build the servo control cabinet
Attachment 423338
I mounted it to the side of the Machine
Attachment 423340
I had to drill and tap for more armored conduit runs
Attachment 423342
Re-organized the rear control panel after removing all of the stepper components
Attachment 423354
I then mounted the motors (having to do some cutting on the way covers since the servos are longer, stainless way cover extensions are being made)
Attachment 423348
Attachment 423346
Attachment 423352
Visit my other post on the Mikini subforum for more pics: https://www.cnczone.com/forums/mikin...ni-servos.html
Re: Pics of my DMM servo retrofit build
How’s it all working for you? Very clean looking install.
Re: Pics of my DMM servo retrofit build
Quote:
Originally Posted by
Daniel92563
How’s it all working for you? Very clean looking install.
Everything is working great so far! I haven't machined any metal yet (was waiting on new way covers) other than some small drilling jobs but have cut plenty of Delrin and wood. I would say the servos are game changers!