numc_board sys_fail . Error on Hitachi Seiki VK45-2
Hi Guys,
having troubles with my Hitachi Seiki VK45-2 with Seicos control. The control does not start up saying NUMC_BOARD_SYS_FAIL . Then it shows "table checksum failed". I assume that the problem is in control board and already called for a fellow guy who specialise in cnc controls but maybe some of you already have gotten such an error ?
Re: numc_board sys_fail . Error on Hitachi Seiki VK45-2
Hello
could be the board itself, the NUMC are faulty at times. If you are getting this alarm randomly you can try to re-seat the NUMC and see if its a connection issue. Try that and report back
John
1 Attachment(s)
Re: numc_board sys_fail . Error on Hitachi Seiki VK45-2
Quote:
Originally Posted by
shas595
Hello
could be the board itself, the NUMC are faulty at times. If you are getting this alarm randomly you can try to re-seat the NUMC and see if its a connection issue. Try that and report back
John
Just got back to the shop. Had reset NUMC and SPHC boards and do not know what to do further - it's just sends these errors (on attached photo) and i cannot clear them and go further than that screen (i assume that i need to set all the parameters back but cannot proceed to that menu)
https://www.cnczone.com/forums/attac...d=443106&stc=1
Re: numc_board sys_fail . Error on Hitachi Seiki VK45-2
Hello
do you mean you replaced the boards? If so you need to regenerate the data and reenter it, its not a hrad process. Please confirm if you did in fact replace the boards
John
Quote:
Originally Posted by
evidence_87
Just got back to the shop. Had reset NUMC and SPHC boards and do not know what to do further - it's just sends these errors (on attached photo) and i cannot clear them and go further than that screen (i assume that i need to set all the parameters back but cannot proceed to that menu)
Re: numc_board sys_fail . Error on Hitachi Seiki VK45-2
Hi Evidence, did you ever resolve the problem. i'm having sim. problems with my mill and looking for info if you would care to share .
Adrian [email protected] in case you would prefer to email. Thanks'