Toyoda representative here if you have any questions
My name is Anthony and I am an employee from Toyoda Machinery USA. CNCzone recently created a sub-forum on the site for Toyoda and because of that; I’ll be the representative to address any questions or issues you might have.
The information we gather from trade forums is very valuable to us, especially when designing machines. Having a forum such as this provides the feedback our engineers need to continue developing machines that meet the needs of consumers.
If anyone ever has any questions about any Toyoda products, parts, or service, feel free to post on here, or message me directly and I will do my best to assist you. I’m going to make the effort to check the forum multiple times a week, so hopefully we can respond to your questions promptly.
Rebuilt spindile - vibration at max rpm
Hello Anthony,
We have a toyoda BM 1400 VMC, IT is about 6 years old. We have had to have the spindle rebuilt twice in the last 90 days. We have just had the spindle put back in the machine and the tech person told us to do a warm-up before we ran any parts. During the warm up at max rpm's ( 6000 rpm )we can feel some vibration in the machine and the load meter jumps up to 8 to 10 percent. Do you think this is normal for a newly rebuilt spindle?
Thanks for your help
Bill
Re: Toyoda representative here if you have any questions
Hi Anthony,
I have recently started running a 1989 Toyoda FH55 at work and was wondering if there was a cheat sheet for the M-codes and machine operations
Thnaks