I heard that it is possible to download parameter lists from the MAZAK site. Is it true ? and where do we go to download them because I haven't seen it on their site.
Thanks
Denis Paradis
[email protected]
Printable View
I heard that it is possible to download parameter lists from the MAZAK site. Is it true ? and where do we go to download them because I haven't seen it on their site.
Thanks
Denis Paradis
[email protected]
what your Mazak model?
AJV 3560 1987 CAM M2 controller. I need the parameter list for the pallet changer. We can't get the pallet to change.
[email protected]
You should just need to M Codes to do a manual pallet change. They should be in the M Code list in the operator manual. M71 calls pallet #1 M72 calls pallet #2, some machines use M911 and M912. If you need a complete listing of the M Codes let me know, I could send it to you.
What is exactly is the problem with your pallet changer? Are you stuck in some weird spot? Command doesn't execute? It stops in mid-change? It doesn't start at all?
If you're stuck, you also have solenoids on that machine you can force without parameters. But this all depends on what your "pallet changer problem" is...