2 Attachment(s)
how to wire this encoder to interface with a centroid allinone dc for MPG?
I'm doing a centroid retrofit with allinone DC controller and happen to have this mpg handwheel from a machine that got scrapped. I'd like to use it for a pendant for my retrofit. Is there a way to use this unit? Doesn't have a few of the connections the controller requires- only has the 4 wires you can see on the back- +,-,A, and B....
Re: how to wire this encoder to interface with a centroid allinone dc for MPG?
Just add one MC3487N QUADRUPLE DIFFERENTIAL LINE DRIVER or similar.
Re: how to wire this encoder to interface with a centroid allinone dc for MPG?
Is there a ready made, cheap, screw terminal module that will get the job done?
1 Attachment(s)
Re: how to wire this encoder to interface with a centroid allinone dc for MPG?
As far as I know, there is no ready made module. It can be easy made if you are willing to make your own PCB, or if you have someone that can make it for you.
Just designed one in 10 minutes :)
Attachment 446234
Re: how to wire this encoder to interface with a centroid allinone dc for MPG?
Someone just sent me a link to one, cnc4pc model c72 should do the job I think. Thanks though!
Re: how to wire this encoder to interface with a centroid allinone dc for MPG?
Yes, the C72 module will work for this. It will convert the single-ended signals (A and B) to differential signals (A+/A- and B+/B-).