Using relay w/ G540 - 5v or 36v coil

New to electronics, and I want to use relays to turn on my router motor and dust collector. My power supply outputs 36v and 5v, wondering if there is any reason to get a relay with 5v coil or 36v coil?

I'm looking at a T9AP1D52-36-01 relay, is this a good choice?

It looks to me like that relay would work. Stick with 36v if you have that power supply. Otherwise you end up like me with 4 different power supplies in my case.

Thanks for the reply.

I actually have both 5v and 36v on the oem power supply of my Techno Davinci router, was just wondering if there was a reason to use one over the other,

why not a 48V relay ?

then you can use the G540's 48V supply

what are you controlling with the relay ?

John

I'm using 36v for the Gecko, could use that for the relays.

Controlling router motor and dust collector