Fanuc OO-P - DNC

Hi All,

This is my very first post. I really need some help regarding setting up a DNC for a Fanuc series OO-P.

I would need to know what parameter numbers to change. Could someone please help me on this. I found a lot of documentations online with settings to change but, I figured that these settings are machine specific. I could not find any documentation for Fanuc Series OO-P.

I will be very greatful for your help on this regard.


Kind Regards and Thanks

Christi Das Devathala

Quote:

---

Originally Posted by cddevathala

Hi All,
I would need to know what parameter numbers to change. Could someone please help me on this. I found a lot of documentations online with settings to change but, I figured that these settings are machine specific. I could not find any documentation for Fanuc Series OO-P.

---

May be here:
DNC software. CNC and DNC settings for Fanuc 0-P.

Hi aggsoft,

Thank you for your prompt reply. The solution in the link you have sent is exactly what I have done. No Joy.

I figured that setting PARAM #340 and #341 should set the communication path, but seems like this is not happening. I looks like more of a hardware issue. I also need to examine the PC code in the machine. I guess its not setting the correct bit

Please lets us know, if you have come across other issues on this regard.

Hi cddevathala

I have too a machine used FANUC 00-P as same as your machine. And i don't know configure these parameters in order to communicate with DNC.
Because i tried parameters for FANUC 0-P but can't transmit program to machine.
So did you fixed your error?
Please help me. Thank you.