Matsuura Mc500v seq error/magazine error
I have 2 Matsuura 500v CNC milling machines. 1985 and 1986.
usually when it is cold in the shop, such as on a monday after a weekend...I get an alarm:
400: SEQ ERROR
users message
425: [47] magazine error.
after warming the machine up for about 3 hrs or so the tools will change correctly. Any suggestions as to what might be worn, sticking or other?
got an mx2 controller on it
Re: Matsuura Mc500v seq error/magazine error
Quote:
Originally Posted by
gmsmachinists
i just tried what you said and the same code comes up..
so there is a sensor under the tin cover that's under the tool changer. under chain take the tin cover off .. up under the motor that runs the chain around up under there under the motor there is a red light that has to be on when the chain is stooped its hard to see up under there if out of time you may have to rotate the motor by hand to get the light to come on ..when machine is running tool changer around and you hit e stop chain motor will stop in wrong place
Re: tool changing problem
Quote:
Originally Posted by
gmsmachinists
im having a problem on my matsuura 500v with a mx1 controll,,my tool changer wont change and i have tried all the ways to do it...my z does zero out but the atc light does not come on..when i attempt it alarm 400 seq error2 and user msg412 17 m06 error4 comes on everytime..the tool changer doesnt even try to move and i hear nothing like maybe its trying but nothing,,what would cause tis problem and what can i do to fix it..really wanna run tis machine...thanks and look forward to hearing some answers and again thanks
So you need to adjust a paramter. theres a few litimit switches on the z axis. And it will go past one, to hit a certain point to line up with the ATC, and have the light illuminate.
Had to figure this out after loosing all my paparmeters a bit ago. going to be 6304 6305 or 6306 on that number. No decimals. For example, mine are set 7123, 1775, 7256 respectively.