Looking for some code help for tapping on my lathe. It's a 2001 CL-153 with a Mistubishi controller.
Here's the code from Fusion 360 i'm trying to use for a 3/8-24 hole, but it alarms out:
T1111
G54
G98
G97 S200 M3
G0 X0. Z2.0147
G0 Z1.6147
M29 S200
G84 X0. Z0.5439 R1.4939 P0 F8.3
G80
Z2.0147
G28 U0.
G28 W0.
M30
(The M8 and M9 were deleted for testing)
I'd like to use the canned G84, but not opposed to using G32 if needed.
Thoughts?
Thanks!
Todd
Orange, CA
