1 Attachment(s)
Precix 9100 4'x8' cnc router (anomaly?)
Hello! and thanks for viewing :)
so i have a precix 9100 cnc router made for sign makers i believe. regardless this machine has been a nightmare from the get go. got it used (bad idea) only saved a few thousand which i have now spent in hours fixing!!! long story short i have overcome all the BS had the controller rebuilt in canada and i think it came back in worse condition HA! however it has been running like a dream for the last few months.
this week i introduced a program to the controller which i will add as a standard gcode notepad form. and for some reason at line 6445 of the code the spindle speed drops from 20,000 rpm to 7,000. i have gone back in and added S20000 F2.5 before and after to have the controller kick it back up. i tried this, no success, the contoller is set on spindle speed override to STAY at 20,000 i also ran it with auto and Mcode control and nothing works.... there is no M or G code anywhere near this line that would support such actions.
i am at a loss to say the least. precix is not helpful at all. i am unable to logically troubleshoot any further. concidering i have changed the post order of the processes and even removed portions. run seperately works fine, all together every time right about the 6,445 line of code the controller overrides its own override feature for spindle speed. the issues is not major i just dont like using a stopwatch to run back to the machine and change it back to 20,000 to avoid chatter marks. irritating mostly.
any help/advice would be invaluable to keep my ocd at bay. this thing is driving me nuts! thanks again for your intrest and time!
Sincerely,
Garrett
6445
Re: Precix 9100 4'x8' cnc router (anomaly?)
I know this is 13th s since anyone has commented. But I have a precix cnc for my business. And seen you mentioned about the lic has expired. Mine just popped up today with this and can’t do anything. Curious on how you found out about changing the date in the system. I’ve tried back dating it to 2020 and still having this issue.