Originally Posted by
meflis
RE:
Suggestions:
1. Run it without cutting anything and see if it still has problems. (Y/N) No
2. Determine which axis is having problems. (x, y, or z) Sometimes X and other Y
3. If just one axis is having problems, it could be binding in the mechanics, or a problem with gantry racking. (Y/N) i have watched it and did not notice any skipping
4. If you have the limit switch wiring snugly bound with the stepper motor wiring try separating the limit switch wiring away from the stepper motor wiring to see if there are crosstalk issues causing the problem. No limit switches
5. If #1 - 4 above are ok, then swapping stepper motors or cables to the motors may become necessary. Have swithed X and Y no difference but have not changed cables
CarveOne