3 Attachment(s)
Gildemeister CTX600 dont want to start
Hello Team
Please help, hope that I can get any advise and thank You in advance.
Machine DMG CTX600 was switched off for long time.
Now we are starting it and it stays after start with displayed DMG Logo and communicate at the bottom "Signalsuche an RGB Analoger Eingang".
There is Heidenhain CNC1190 unit in cabinet and I can see displayed on it code with no 6. Dont know what it means.
Already replaced 24VDC power supply unit and Heidenhain unit battery. Did not solve the problem,
I have no idea and no start point to move forward.
I have started thinking that maybe battery in CNC unit went down and it lost everything but anyway to me it should load up to main screen with for ex. info about no parameters downloaded or similar.
Please advise if some of You have an Idea or had similar problems.
I have add some pictures for better understanding what I have written above.
Re: Gildemeister CTX600 dont want to start
Quote:
Originally Posted by
LukaszCNC
Hello Team
Please help, hope that I can get any advise and thank You in advance.
Machine DMG CTX600 was switched off for long time.
Now we are starting it and it stays after start with displayed DMG Logo and communicate at the bottom "Signalsuche an RGB Analoger Eingang".
There is Heidenhain CNC1190 unit in cabinet and I can see displayed on it code with no 6. Dont know what it means.
Already replaced 24VDC power supply unit and Heidenhain unit battery. Did not solve the problem,
I have no idea and no start point to move forward.
I have started thinking that maybe battery in CNC unit went down and it lost everything but anyway to me it should load up to main screen with for ex. info about no parameters downloaded or similar.
Please advise if some of You have an Idea or had similar problems.
I have add some pictures for better understanding what I have written above.
Hi
did you solve your problem? if not, call me at [email protected]
Re: Gildemeister CTX600 dont want to start
Quote:
Originally Posted by
Mamut
Ask it here, answer it here. That's the purpose behind having a forum.
Re: Gildemeister CTX600 dont want to start
Quote:
Originally Posted by
wendtmk
Ask it here, answer it here. That's the purpose behind having a forum.
hi
I asked for a private contact because I have the procedure for this error that happens after the battery fails, these documents are dmg authored for this reason I didn't post them here. I can pass it on to anyone who needs it , sorry if something felt wrong
Re: Gildemeister CTX600 dont want to start
Hello
Thank You guys for You answer to this topic.
I did not solve it yet.
I will reply to your email.
Thank You in advance
Re: Gildemeister CTX600 dont want to start
Hello Lukasz
Did you find the solution ... will be great because we have the same problem ...
The only difference is that our message is not 6 , it is D.
The machine was ok until yesterday, from today is out ...
Thank You .