Hitachi Seiki Service and Support!!!!!!!!1

hello everyone i have a VA40 mill i believe 1983 model, it has the fanuc 6 control, was running awesome till yesterday, alarms came up. all the oil is topped up but will not clear. one of the LED on the board on the power side cabinet is let up i was told it was a spindle cooling alarm. i had this problem before and it was the fan on the top of the spindle and gotten stuck. i repaired it and we have been running ever since. however this time i checked the fan on top and it's free. i disconnected it and the alarm will still not clear. when you hit the black reset on the board below the light it comes right back on when you let off, i believe something else is shorted but any advice on where to look would be appreciated..

Hi all,
I have a Hitachi Seiki Model VA-40 CNC Vertical Machining Center, Fanuc 6M.
Now, i need maintenance but I have not manual, an electric diagram and draw mechanic
please help me and send to my email: [email protected]
Nick skype : van-hoc
Mr Van

One of our client has wire cut EDM got problem .


Details of wire cut edm:


Machine Model: 203R

Brand: Hitachi

Controller: MARK-10W X2

Made in Japan


Problem Details: Some time machine shows U and V axis servo encoder problem, some times only shows " Not Ready"

we did not found any alarm on YASKAWA servo drive.


Customer needs maintenance of the machine urgently.


Please let us know if you can solve the problem. you also propose us up gradation of the machine if you can.

Hi, I have Hitachi HG500 with Fanuc 15MA control.My machine says hitachi screen SL-BUS error.
Can you help me?
And i do not have backup files?
Best Regards.

Hello,
please message me with you email address. Your inbox is not working

John

Hi, my mail [email protected]
Best Regards.

dear
I have hitachi seiki vm40 seikos m2 and I want to change the language to English but i don't know the parameter.Its kind of you that help me.

best regards

Ali

I have 5 Hitachi Seikis and I love them, but I can understand some of the pains all of you are going through. Im in Houston, so I obviously try and use local techs, but when Im in a bind for parts or technical support, I use Metal Medixs. Henri Van Hende knows Hitachis better than anyone I have ever talked to. Just an FYI for those who have issues with service.

Hello All,

I have a Hitachi Seiki VA 45 that has issues
my shop is in Southern California, please let me know if anyone has a recommendation for a service person that knows these machines..
We also have a ht20 lathe, but its been fairly reliable so far, but could use some service as well.

Thank you,
Robert Taylor

Try Norman Ready 213-280-8376, [email protected]

Kirk

Quote:

---

Originally Posted by kmuller

Try Norman Ready 213-280-8376, [email protected]

Kirk

---

Called Norman, seems to be very confident that he can fix the machine, hes coming next week to give it a shot.. I will post results as soon as we have them.

Quote:

---

Originally Posted by Hitachi_man

My name is Josh and I am the Hitachi Man. I have been hard to reach off and on for awhile now. Due to a huge down turn in business I had to take the work I could get. I am starting to see the light at the end of the tunnel as things are starting to pick back up again though! I am going to post my email address on here for anyone and everyone that has or comes up with Hitachi Seiki problems. I may be in a position very soon that would allow me to travel again, in which case I could start scheduling service for those of you who need it. So lets see how this works!! I am firing my business back up. Feel free to contact me at: [email protected] this is a sure fire way to make sure I get the message and I WILL get ahold of you, I get these emails on my phone too!!

Josh

---

Josh,
Are you still available???

Let me know
[email protected]
214-828-4149
Gamy R.

Hello. What is the serial number and control type on your CA23? We may have a PDF file for this manual.

Tara with Cyber CNC Machinery Sales

[QUOTE = CyberCNC; 1742340] Hallo. Was ist die Seriennummer und Steuertyp Ihres CA23? Wir können eine PDF-Datei für dieses Handbuch zu haben. Tara mit Cyber ​​CNC Machinery Sales [/ QUOTE]

Here's written:

Quote:

---

Lathe Hitachi Seiki HiCell 23S Baujahr 1997 Typ CA 23 Serien-Nr. T 1227103 Elektrische Schaltnummer 1642-1401

---

Greets Mic Schwizer

Dear Josh:


I have many questions about a machining center Hitachi with the following characteristics :
Machine: HITACHI SEIKI
CONTROL: FANUC 6M Model B
Type: MACC MATCH
MFGNO: C22162-1
1984-10

Can you give us technical assistance?
Best Regards

my email is [email protected]
my name is Esteban Sejas
whatsapp: +591-79014994

Quote:

---

Originally Posted by Esteban_Juan

Dear Josh:


I have many questions about a machining center Hitachi with the following characteristics :
Machine: HITACHI SEIKI
CONTROL: FANUC 6M Model B
Type: MACC MATCH
MFGNO: C22162-1
1984-10

Can you give us technical assistance?
Best Regards

my email is [email protected]
my name is Esteban Sejas
whatsapp: +591-79014994

---

Dear Sir,

I do not believe this is an Hitachi Seiki machine tool. can you please supply Model and serial number if you are still looking for support.

Hi John,
Can you give me a call at 203-483-1420, I am having problems with a Hitachi Seiki HT 20SII.
Bruce
Mold Threads, Inc

I am look for support for a Hitachi Seiki HC 400. If experienced with this machine , I can pay for support.
The machine has a Fanuc 15 M controller .
Recently it has developed an intermittent problem. It starts up normally, all normal lights lite, no alarms ,, but no axis move in handle or any other mode.
Therefore I can not Auto Zero the machine. It just sits there looking like it should be running and not.
I am sure someone has dealt with this other than me.
Regards,
John from dambest Carburetor
845 473 1136

Dear sir,
I am baskaran from sharjah my machine hitachi 23s ii type machine continuous off ,how much month back up storage ,now time spindle bearing removing already one month finish

Helllo guys i just got a Seiki Seicos my2 and i have some smalll problems . My machine had 5 axis some time ago . Some one stole the 4x5 axis from the machine and cut the wire . I have managed to get the wires out . started the machine and i need some how to get out the 4x5 axis from the software so i can work with the machine in 3 axis as i want . Did some one have made this modification ? Attachment 343312Attachment 343314 i have fix the hard limit . I cant find in the manual how to get out the extra axis .