I just purchased a 98 Mori SV500. It has bt40 claws and all my tooling is ct40. I would like to trade with anyone who needs bt40 claws. Or purchase some. Or build my own. Also what other machines are interchangeable?
Attachment 298858
Printable View
I just purchased a 98 Mori SV500. It has bt40 claws and all my tooling is ct40. I would like to trade with anyone who needs bt40 claws. Or purchase some. Or build my own. Also what other machines are interchangeable?
Attachment 298858
Have you tried getting them via Mori?
MV40A,B, MVJr, SV50/500, NV5000, M300, FM1,FM2,SV40/400 dura vertical 5080/5100, NVX 40/4000, NVX 5000, NVX 6000 and I'm pretty sure SH40,SH400, and NH4000. Those things are big money from Mori, and I sold all the extra I had.
Sent from my A3-A20FHD using Tapatalk
Not too tricky, except maybe the angle for the v flange. At ~800 a piece, might be worth making a few.
Sent from my A3-A20FHD using Tapatalk
I ended up making my own set. I ran them on my old machine ( AWEA AV1000 ) as that was easier than changing all the tools by hand on the mori.
Attachment 307744
Keep that program! I can sell a few a year....
Sent from my A3-A20FHD using Tapatalk