Maho MH800C 5axis Philips 532 - B02 alarm (measuring system alarm)
Hello All,
Our company bought this used machine around 2 months ago and we didn't power it up since last week.
Machine parameters are still there. I tried to bring the axes to RP, x,y,z were ok but axis B (turning rotary table around y axis) wont move at all. neither manual nor with RP command. If you try, the hydrolic will power off.
When i try to RP axis A (rotary table), the table wont stop moving!
Any suggestion?
b.t.w with the machine we got a 3axis vertical postprocessor. What should we do for a 5axis processor? should we buy it from DMG MORI? or it can be downloaded?
Thanks alot,
Afshin
Re: Maho MH800C 5axis Philips 532 - B02 alarm (measuring system alarm)
Now this error (B02) comes at the beginning and wont let the hydrolic to stay on.
1 Attachment(s)
Re: Maho MH800C 5axis Philips 532 - B02 alarm (measuring system alarm)
[QUOTE = afshin1978; 2389714] Ova pogreška (B02) dolazi na po?etku i ne?e dopustiti da hidrolik ostane. [/ QUOTE]
2 Attachment(s)
Re: Maho MH800C 5axis Philips 532 - B02 alarm (measuring system alarm)
Quote:
Originally Posted by
afshin1978
Hello All,
Our company bought this used machine around 2 months ago and we didn't power it up since last week.
Machine parameters are still there. I tried to bring the axes to RP, x,y,z were ok but axis B (turning rotary table around y axis) wont move at all. neither manual nor with RP command. If you try, the hydrolic will power off.
When i try to RP axis A (rotary table), the table wont stop moving!
Any suggestion?
b.t.w with the machine we got a 3axis vertical postprocessor. What should we do for a 5axis processor? should we buy it from DMG MORI? or it can be downloaded?
Thanks alot,
Afshin
B axis encoder was damaged (not sure about the cause). Encoder out, B axis read out, and now it works with a vertical 3axis postprocessor.
Now I wonder if anyone has a 5axis postprocessor or a 3axis horizontal?
Best regards,
Afshin