What is the difference between Delcam's Duct-Post and PM-Post? Is one a subset of the other? Which one do I need to look at to convert Powermill toolpaths to and NC file?
Thanks,
Printable View
What is the difference between Delcam's Duct-Post and PM-Post? Is one a subset of the other? Which one do I need to look at to convert Powermill toolpaths to and NC file?
Thanks,
There is no difference for converting toolpaths. Delcam's duct-post is the default machine post processor where you can make some changes. In the PM-Post you can create the same post processor as the default one but also you can create a completely new post processor
A friend of mine found a Powermill Post Processor option file that works between Powermill and Mach3 mill.
Use at your own risk since I did not try out all of the features in it. But, I did try it out and it does work for me.
The post processor option file is attached.
Thanks,
I for Mach2 a pos-pm at the post but I can not coverter for the pmopt opt.
Solutions? :drowning:
I am uploading an updated version of the PowerMill Post Processor option file for Mach3. In the older version that I posted on this thread, a G28 command was used that will use the Machine Coords to go to X0Y0Z0 which messed me up sometimes. This new version no longer uses G28. Instead, I had the Z height increase to move the tool bit out of the work area at the end of the gcode file.
Also, use this Post Processor option file at your own risk since I will not be responsible for anything.
However, I do personally use it myself.
Thanks,
Here is an updated PowerMill Post processor. It was modified using Delcam's PM Post Processor 4.7.00. I performed simple tests using PowerMill 2010 and Mach3.
This version is for Mach3 controller and fixes some of the IJK coordinates system (now uses absolute rather than incremental values). There are some other changes to make things work as expected.
Again as always, use this at your own risk. I cannot be responsible for anything.
good question you might have better luck at the Delcam forum
I did not see a Mach3 post processor on the Delcam forums site. If someone sees it, can they please provide a link or post it on this site?
Hi,
Hey can some body help me with conveting a .opt post to .pmopt.
My current .pmopt outputs my rapid moves as G1 instead of G0.
Any one knows what part of the .pmopt I need to tweak to get G0 outputs for my rapid moves
.i have made a tool path for CNC machine for milling operation, so that i can run the machine and finally made my component....but now i want to do simulation of that process.
my problem is that i want to extract the Co-ordinates value in tabular form from the power software. but i dont know how can i??
Could u plz help me in this?
i have made a tool path for CNC machine for milling operation, so that i can run the machine and finally made my component....but now i want to do simulation of that process.
my problem is that i want to extract the Co-ordinates value in tabular form from the power software. but i dont know how can i??
Could u plz help me in this?
Edit/Delete Message
I need the post processor for mach3 controller linking with the power mill 2010/2012.
can any body knows how to build the post processor for a specific machine controller or to generate.
Thanks in advance..!!
please help
if anyone is interested I have a post for a fanuc18i MB - in the old *.opt format
is there anyone who can provide 4 axis post processor (.opt) file for delcam, fannuc machine is the machine i have
I can change your postprocessor files for any kind of controller just pm me ...
i need post 4axis mach3 fr powermill
Hi,I would like to know if anyone could help me out please?I am after a postprocessor in old *.opt format for siemens 810d
Any help will be greatly appreciated.
Thank you.
I need post for fanuc 18-m
Hello, im very interested in make a postprocessor for EMC2. My machine have 3 axis and kress spindle...
I use powermill 2011 and opt file.
Can anybody help me to find anyone that fit my machine? or... what can i do to use powemill?
thanks a lot
Adam,
This is a 2 year old post, hope you are still around to answer...
I want to adjust a Fanuc post to work with Mach3, and then also the new software from Tormach. Its seemingly an easy adjustment, but I can't get the files to load to edit. Some help would be very gratefully accepted. PowermIll 6.
Always
Jim Anderson
Anderson Prototypes
4th axis fanuc post.
I hope it works
Good afternoon,
can someone here to download the post processor mitsubsih m70 to PowerMILL 2017?
greetings
hello i need post processor .pmoptz for selca or other controller 4 axis B pm private the example thanks
Hello I need Fanuc 4x PostProcessor for Powermill
Hi, i need post 3axis mach3 fr powermill
Hi, I need a powermill post processor for mach3 3 axis.
Anyone have it?
Could you send to me?
Thanks!!
hello I'm using powermill 2018 does anyone have a post that will work with a makino A55?
Sent from my SM-G955W using Tapatalk
Hello, I need 4axis powermill postprocessor .pmoptz for ncstudio
Umm, hello.. I need post processor .pmoptz for Roland EGX-600.
can anyone share it?
thanks in advance
Hello, I need post processor .pmoptz for Roland EGX-600.
can anyone share it?
thanks in advance.
[QUOTE = vall0808; 2093388] https://yadi.sk/d/HOK6yt243MuAsS
РМ2017 [/ QUOTE]
I get the F without point example F100 as I solve it please i need F100.
I get the F without example point F100 as I solve it please
Good day to all my post processor goes without point. example: F100 instead of F100. Can someone help me please
Good day to all my post processor goes without point. example: F100 instead of F100. Can someone help me please
Are you familiar with editing post. You need to change the format of feedrate parameter. From ### to ###.
Or just give me your mail
Cheers
Urgent , i need post processor of 5 axis fagor 8055m machine using master cam software. please upload
good job !! thank you ^^