I will add our Tec-Docs and Service Bulletins by their priority. If a specific procedure is needed, please make a specific request.
All requests should include the following information:
Model:
Serial Number:
Control Version:
Printable View
I will add our Tec-Docs and Service Bulletins by their priority. If a specific procedure is needed, please make a specific request.
All requests should include the following information:
Model:
Serial Number:
Control Version:
How to tell if your lube lines are leaking, or distribution ports are malfunctioning, or if the pump is failing.
If working correctly:
Watching the analog needle gauge during operation should show the following...
1. The transition from A to 6 should be smooth.
2. The slight pause at 6 to C as the ports charge.
3. The transition from C to 16/E should mimic the smoothness of step 1
4. E to F should hold pressure as long as the Lube-on timer is active.
5. The transition from F to H should be rapid.
6. Ever-so-slight needle slowing action at the end.
Areas of issue:
1. All timing transition take a long time.
A. Pump is failing?
i. remove main line from pump and plug off pump, then test
a. If pump get to correct pressure immediately it is functioning.
b. If pump is slow or does not make it to correct pressure = pump has issue.
B. Leak in Main Lines
i. Locate and repair leak in Main Line.
2. Long pause at 6 to C (only)
A. Sticky distribution port, closing slowly.
i. Replace effected port assembly
3. Long pause at 6 to C and long transition from C to E
a. Issue with distribution port(s) remaining open (or broken)
i. Replace effected port assembly
4. E to F fluctuates of not correct (verify step 1.A.i.b.)
A. Pressure regulator has issue.
i. Adjust or replace regulator.
5. Transition from F to H is slow
A. Pressure relief valve plugged or faulty
If in doubt of the action, email me a video of the gauge when manually activating the lube pump.
How to Upload/Download Ladder for F-30 Series Controller
HOW TO SET THE HOME POSITION (DOGLESS) for Absolute Position Coder style of machine
HOW TO SET THE HOME POSITION (DOG) for Home Switch style machines
How to regarding Electrical and Ladder
Basic Training course on Ladder and Electrical
PDF is of the "PMC Maintenance Basic Training Manual"
An understanding of basic Electronics would be helpful when reading this manual...
How to Re-alignment a Lathe Sub Spindle to the Main
How to use TRACE on a 16i, 18i, or 21i control.
TRACE allows for the recording of selected inputs and outputs, using various start-triggers and/or stop-triggers. Allowing I/O from before the alarm to be looked at, after the alarm.
How to use TRACE on a 0i, 31i, or 32i Control
TRACE allows for the recording of selected inputs and outputs, using various start-triggers and/or stop-triggers. Allowing I/O from before the alarm to be looked at, after the alarm.
is there a procedure for cleaning or deburring he cervic coupling
puma 400 b
ml0126-004758
fanuc contro; i seris