Hello,https://maxcdn.cnczone.com/images/misc/paperclip.png Attached Thumbnailshttps://www.cnczone.com/forums/attac...1&d=1607881981
i put a scheme of what i want to do :
https://www.cnczone.com/forums/attac...d=454262&stc=1
I bougth a piece of card (Z80, CPU683 68EC020 PLC Tecnos system and input / output) for upgrade my cnc Master Project 323 who's working correctely with his old system under Dos ... but not very easy to use
These cards was working into a Masterwood Project 309 retrofitted
I replace old card (68000 named 681) by 683
and Z80 Si_89 by Si_96
I wonder if someone could help me to introduce good parameter to make it working ?
Regards, GLP
with some photos of retrofit of the Masterwood :
this new CPU3-2M CPU68EC020-2003-01 (31SFC104640) card
https://www.cnczone.com/forums/attac...d=455398&stc=1
will replace the older CPU1 (68000) KTC91
new https://www.cnczone.com/forums/attac...d=455384&stc=1 old
The old I/O cards (ACCTC90/02) will be replaced by new I/O cards 61SFA300101 (ASSI_CC_2007_01)
https://www.cnczone.com/forums/attac...d=455386&stc=1 https://www.cnczone.com/forums/attac...d=455388&stc=1
The communication interface Si2.5 is replaced too by SFS10150 SI_96_01 (31SFS101460)
https://www.cnczone.com/forums/attac...d=455392&stc=1 https://www.cnczone.com/forums/attac...d=455394&stc=1 https://www.cnczone.com/forums/attac...d=455396&stc=1
and RamDisk Card is suppressed because no need anymore
https://www.cnczone.com/forums/attac...d=455400&stc=1
the software MasterWork drive everything
To be followed
https://maxcdn.cnczone.com/images/misc/paperclip.png Attached Thumbnailshttps://www.cnczone.com/forums/attac...1&d=1609255578 https://www.cnczone.com/forums/attac...1&d=1609255713 https://www.cnczone.com/forums/attac...1&d=1609255801 https://www.cnczone.com/forums/attac...1&d=1609256761
https://www.cnczone.com/forums/attac...1&d=1609256066 https://www.cnczone.com/forums/attac...1&d=1609256105 https://www.cnczone.com/forums/attac...1&d=1609256132 https://www.cnczone.com/forums/attac...1&d=1609255517
