Need help with Mazak Slant Turn 15 Univ. / Mazatrol T1'
We have problems with our "oldie", a Mazak Slent Turn 15 Universal 1000 with Mazatrol T1'. Maybe somebody here can help?
When turning it on the relay QF is turned on which results in the quilt sleeve moving forward which in turn results in an emergency stop (f28 alarm code). This happens every time. The error has first ocured after we have had the PCBs repaired by Mitsubishi Electric. The problem did not occur before that repair (but other problems did which noiw appear to be fixed).
Mazak and Mitsubishi are not of great help in finding the cause.
We suspect that the parameters might be messed up (battery). But entering the factory defaults has not changed anything. is it possible that we are missing some "secret" manufacturer parameters (namely the OP ones?) that are not in the documentation we have?
We have the following:
----------------------
- Mazatrol T1/T1' operating manual
- MAZATROL T1, T1' INTERFACE DIAGNOSIS TROUBLESHOOTING MANUAL. The charts in its appendixes (A-D) match other machines that we
have: The Quick Turn 10N and 20N. We do not have that particular document with the appropriate info for the Slant Turn 15 Universal 1000.
What would help us solving the problem:
--------------------------------------
- I/O address chart
- Parameter Explanations
- Alarms and Trouble Shooting Guide
All for the slant turn 15 universal.
Does anybody have access to that kind of info or an idea what could be wrong or what could be done to investigate?
Best from a newbie in this forum,
Thomas
Help on parameters list setttings on Slant Turn 15
I am trying to get a Parameter list for my Salnt Turn 15 with a Mazatrol T-2. I am willing to buy a copy of the manuals if anyone has them available. I cannot get any support from Mazak since the machine was originally sold in Australia. It has been a long story with Mazak!
Thanks,
Robert
Mazatrol T1 Manual in English.
I am in need for Mazatrol T1 Manuals in English. My Mazak CNC Lathe is not working. I need complete set of manuals.
Can anybody out there help. I am novice in CNC. No help from Mazak or Mitsubishi, found 1 guy but he is demanding very high price. I opened the control panel and physically looking at the controller and drivers, everything seems to be all right, based on the condition of the controllers. Looking at the machine's iron, I am sure its not very much used. The battery is replaced, there was some problem in the transformer, which I have repaired. But now don't know what is the next step. Because the manuals are in Japanese..
Thanks and have nice day
Rizwan
Need help with Mazak Slant Turn 15 Univ. / Mazatrol T1
I have a set of Mazatrol T1 manuals in english but I do not have the parameter list for the Slant Turn 25. The manuals are useless unless you have the parameter list. If you have a complete manual set them maybe we will be in luck. I can scan my manuals and and send a pdf to you and you could send me a copy of your parameter list.