How to Select a Drawing in mcx7
I have a .dxf file which contains 28 small drawings and each drawing will fit on a 8.5”x11” sheet. I was told to select all, which I did and then separate them in printable pages.
So after all are selected how I convert each drawing to a printable page?
My knowledge in mcx7 is quite rusty, so please explain
Thanks
Re: How to Select a Drawing in mcx7
Sounds like you have to window each drawing and use "save some" to save 28 different files and name them 1 thru 28? Then pull up each drawing seperate, fit all and print.
Re: How to Select a Drawing in mcx7
Quote:
Originally Posted by
GCSRT
Sounds like you have to window each drawing and use "save some" to save 28 different files and name them 1 thru 28? Then pull up each drawing seperate, fit all and print.
I gave up on mc because I found the free AutoDesk DWG TRUEVIEW 2021 and now I have my prints. The truview 2021 is only to view and print .DWG or DXF and thats all I needed. Thanks for your time