Just hobby , not really art.
http://www.cnczone.com/forums/attach...d=298106&stc=1
http://www.cnczone.com/forums/attach...d=298108&stc=1
https://youtu.be/dqxbOPUWah8
Printable View
Bas-relief engraving. 0.35mm depth.
Attachment 304422
Attachment 304424
Attachment 304426
Attachment 304428
:-)
man you got patiency like ten other together..
I understand the process that you glue it on the holders....
but after you mill it theres left no rigidity..
how you can remove the ready egg?
another question, what diameter that tool you are using?
keep going to posting.. its fantastic...
Awesome project.
Thx Victor.
how you can remove the ready egg?
[Just melting the glue]
what diameter that tool you are using?
[For relief engraving -- 0.2mm 30 degrees flat tip engraving tool]
[For hollow out -- 0.6mm PCB rout bit]
uvvvvw
Your machine is this just 3 axes or 4?
what control software are you using?
very nice work, it's good to see something different
Thx mactec
Your machine is this just 3 axes or 4?
[Its a 3 axes machine. Two rotary and one linear.]
what control software are you using?
[Mach 2]
That is gorgeous. It is this type of awesome that has inspired me to get back into CNC. Keep it up!
-John
This is INDEED art. It's really great and inspiring to watch your work and patience. Must have cracked a bunch of them before you mastered this.
Thanks John and A_Camera.
And yes, cracked quite a lot before the machine and software have been optimized : )
Saw a beautiful iron work pattern in a shopping mall last week.
Took a pic and engraved the pattern on an goose egg shell.
Attachment 307572
Attachment 307574
Attachment 307576
The membrane inside the egg shell has not yet been removed.