Printable View
Hi All
I am based in Cape Town and has just started building my first CNC.
I am building a Root 3 CNC but with my guide rails at 40x40mm.
I will start a build progress thread as soon as I start receiving my first parts.
Looking forward to contributing and learning from the other members here.
Cheers!
Welcome Skillet. I moved to Somerset West from Port Elizabeth a year ago. I have been working on a Tormach PCNC770 for a year and during that time I also converted my BF20L milling machine to a CNC machine. I run it with Mach3 and is also still learning the ropes.
Regards
Ockert
Quote:
Originally Posted by ockert
Hi Ockert
Great to hear from someone local! I have to admit that I am so new to this that I had to go google the machines you mentioned above.
These are some serious machinces and so far out of me DIY build’s league!
I am waiting for most of my items to still arrive from overseas so my project has not gotten Of it’s feet yet. I need to wait to get my gantry plates cut in any way. I did not have much luck with this so far. I ended up thinking of asking a family member to lasercut these from 6mm MDF and then just glue them up to make 18mm thick plates. I can then mill proper plates when the machine starts running. I also got some designing practice using Fusion 360 to create my own dxf’s for these.
Are you using your machines as a hobby or to generate income? These are obviously metal capable machines. I would be very impressed if I manage to mill some aluminum with my build, even if I need to mill shallow and slow.
Oh! And welcome to the Western Cape!!!
Keep in touch!
Jacques
Hi Jacques, welcome:) Looking forward to see your build. I moved from Rustenburg to Adelaide few years ago...
Hi ErickQuote:
Originally Posted by ericks
Thank you!!
Are you still into CNC down there?
Hi Skillet
Any progress on your machine.I am where you were a year ago.The dreadful design phase.Any info on local suppliers for good quality structural aluminium profiles.I am looking to build a 1.2 x 1.8 meter CNC router.
All the best
Hi Pottas
Another year has gone by (or is it longer) cos I am where you were when you wrote to Skillet ha ha
Just wondering if you have made progress. I have just joined so new to this forum, you might well have posted something somewhere else about your build, I will check. If so ignore this will catch you on the other side
Cheers John Marc
Quote:
Originally Posted by Pottas
Hi....sorry i somehow missed your post. Yes still into and loving it:)Quote:
Originally Posted by Skillet_ZA
I have missed the updates on this thread. I will really need to spend some time on this machine again. I will make a point of taking some new pictures and come and post here. By the look of this thread it seems that I should not complete the machine at all if I plan to stay in Cape Town. Is the whole of SA in Australia!?!Quote:
Originally Posted by ericks
Thanks....i am waiting to see your progress:)Quote:
Originally Posted by Skillet_ZA
Yes i think there are lots of us here and many still moving over. I just finished my own build, it was great but there are still a few bit's to do. Problem is too many projects going on...
Hallo all.
I have just finished my Root 3 CNC Build about two weeks ago.
I had the machine cut its own waste board last weekend and also cut its own holding down clamps on Tuesday.
I live in Cape Town as well.
Northern Suburbs.
https://www.cnczone.com/forums/attac...0&d=1575557930
I almost got excited when I saw that you moved to Adelaide because I am from Adelaide in the Eastern Cape in the RSA!Quote:
Originally Posted by Skillet_ZA