Mori Seiki CL153 with LG05 Loader
Hey all. I've been scouring the internet looking for some sort of manual on the LG05 loader that was popular with the Mori Seiki CL153. I am finding nothing. DMG Mori can't locate anything either. Here's my issue. When setting up the loader, you enter your location numbers and such into the #500 series blocks on the MSC-803 pendant. All was going fine until I tried to move the loader into the lathe area to set the X axis centerline. It will move about 20mm and stop with an M01 overtravel X error. My machine guy seems to think that it is a parameter issue for the "safety zone" to drop the loader into the lathe area. For anyone familiar with this process, the number I want to set is #514. Does anyone have a book for this beast, or know where I can find the answer? It has to exist, I just can't seem to find it. When the loader is over the workstocker turret, it will drop just fine. That's what led us to believe it was a safety zone issue. There are no limit switches in this area either. Any ideas or help would be greatly appreciated. I searched for it on here and returned bumpkus. Thanks in advance.