Issue Recording probe information in offset

Information is not recording in any offset, in this case offset G154 P9. We are trying but it will not accept information.
This is one of the routines that we have that does not work. Please help.

(P9)
T25 M06
G91 G28 Z0.
G00 G90 G154 P9 X0. Y0.
G43 H25 Z3.
G65 P9832 (PRB ON)
G65 P9810 Z0.5 F150. (PRT MV)
G65 P9811 Z0. S109. (SING SRF UPDT)
G65 P9810 Z0.5
G65 P9810 X0 Y0
G65 P9814 D0.45 Z-0.15 R0.1 S109. (READ X POSITION)
G65 P9810 Z0.5
G65 P9810 Z3. F250.
G65 P9833
M01